Rajesh Hardware & Paints

 A glass fiber reinforced elastomeric liquid applied waterproofing membrane. Asian Paints SmartCare Damp Proof upon curing, forms a thick, seamless, durable membrane thus offering ultimate waterproofing.

1. Anti-Carbonation

   Dampstop Elasto reduces carbon dioxide and chloride ion diffusion which gives protection from corrosion of rebars

2. Flexibility

   Dampstop Elasto elongates up to 160% which takes care of minor crack formation on plastered walls.

3. Self-Priming

   Used as a primer on dilution.

4. Water Permeability

   Resistance towards ingression of water

The emulsion forms films with high DFT
which gives excellent waterproofing.

The coating can be applied directly
without any dilution and very easily can
be applied by either brushing or rolling.

The elastomeric coating forms films which
can bridge cracks upto 1-2 mm

The elastomeric fiber reinforced coating has
excellent mechanical properties. The toughness
helps to withstand the driving rain. The elastomeric
coating endures stresses developed due to thermal
contraction and expansion of concrete.

Coating has excellent adhesion to
masonry surfaces

The coating has good anti-algal as well as
antifungal property.

Can be applied for exterior walls

Does not emit harmful polluting gases

Makes the surface easier to clean

Maximum performance which is based on

Acrylic based emulsion

Environment Friendly

Trouble free cleaning of walls

NOTE

For dark shades and horizontal surfaces 1 or 2 additional coats may be required for better performance of paint film. Primed surface should be immediately painted with topcoats

Choose Your CityChennaiCoimbatoreTrichyBangalore

• Unique, heat reflecting roof waterproof coating
• 10-year waterproofing warranty
• PU Acrylic hybrid emulsion technology
• Reinforced with nano fibres
• Tough durable elastic membrane with > 200% elongation
• Surface temperature reduction upto 10ºC
• High material and labor saving
• Superior Whiteness as an additional feature
• Available in White, Grey and Terracotta ready shade

• USP: Dr. Fixit Pidifin 2K is a high performance flexible waterproofing membrane, which gives a waterproof coating for your bathrooms, kitchen, small roofs, balconies, terraces, wet areas, chajjas, sloping RCC roofs, and basements. Its a two-component acrylic cementitous waterproof coating for water tanks
• EXCELLENT WATERPROOFING PROPERTY: No leakage up to 10 m. hydrostatic pressure. EXCELLENT ADHESION: Excellent adhesion to concrete, cement or masonry surface subject to damage from moisture
• AREAS OF APPLICATION: Concrete foundations, basements wall and lift pits. Swimming pools, water tanks and reservoirs. Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters. Can be applied on damp surface
• HOW TO USE: Apply 2 coats of Dr Fixit Pidifin 2K. Lay a layer of geotextile . Place screed to slope
• PACKAGE CONTENTS: Contains 2 kg of sealing compound and 1 kg of liquid chemical additive

• Roff Supercrete is recommended for use in the following areas of application
• Waterproof and damp-proof coating in the form of cement slurry/cement mortar
• As a bonding agent on cold/constructiopn joints
• Concrete repair as a patching mortar
• Protective layer for cementitious surface
• Injection into concrete/rock structures in the form of cement slurry
• As a mortar or slurry coating for better resistant to chemical attack

• Do not add water to Smart Care Damp Block 2K during mixing/application
• At least 3 to 5 days curing is required.
• Always add powder to polymer, to ensure the mixture is free of lumps.
• Do not cure by flooding with water or conduct any ponding test before it gets completely cured.
• In case of fresh concrete/masonry substrate – the surface must be cured for 28 days before application.
• Overlaying of cementitious screed/plaster must be done within 24 to 48 hrs.

• USP - Dr. Fixit Crack-X Shrinkfree fills cracks up to 10 cm is used for filling cracks in plastered surfaces because it is 100% shrink free & water resistant
• ONE TIME FILLER - Applied as one time filling (does not require second time application, as required in other acrylic sealants)
• FAST DRYING AND FLEXIBLE – Dr Fixit Crack X Shrinkfree is fast drying & flexible with a very light weight & soft putty like appearance
• APPLICATION AREAS – Excellent adhesion to cementitious surfaces like roofs, walls and floor prevents water leakages through the cracks. Non-sag nature helps in filling of vertical & overhead cracks
• HOW TO USE - Step 1 - Create a 5mm x 5mm grove using a chisel Step 2 -Clean the dust, plaster and loose pieces in the groove and wash with water Step 3 - Apply Crack X shrinkfree using a putty blade Step 4 - Wait for 4-5 hours to 

• STRONG BUTYL TAPE: The aluminum foil Butyl tape is made of highly tacky butyl glue, and has strong adhesive property. The aluminum foil waterproof tape can stick on all kinds of surfaces , including glass, cement ground, concrete, asbestos,metal roofing, tile, polyster,Polycarbonate sheets, metal and wood exposed to water and so on.It is most suitable for Flashing application and for stopping water leakages
• LENGTH OF THE ROLL – 10mtr Wide – 100mm SIZE – 100mm x 10mtr
• WATERPROOF - Leakage repair waterproof tape can be used for repairing, sealing, hose, pipe, surface crack etc. Aluminum tape also provides waterproof protection. waterproof adhesive tape is excellent moisture and weather resistant.
• DURABLE & FLEXIBLE - Wear-resistant layers, non-slip & endurable. Waterproof tape for pipe leakage can maintain flexibility & adhesion, withstand a certain degree of displacement, and deformation.
• EASY TO INSTALL: Our butyl rubber seal tape can be installed easily, quickly and ideally on tight corners. Installs without gaps and can reliably shut off wind, water, dust, oil, moisture, vapour, corrosive chemicals, and other leakages.

• USP - Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, with additives in water as a medium
• WATERPROOFING OF WATER TANKS – Dr Fixit Dampguard Classic is a “Potable water safe” coating for waterproofing of water tanks
• INTERNAL WALL DAMPNESS RECTIFICATION- Dampguard Classic can be used to rectify internal wall dampness
• ANTI-MICROBIAL & ANTI FUNGAL - It is used as an internal coating for the waterproofing & treatment of water tanks by providing anti-microbial & anti-fungal properties
• WATER RESISTANT - It has excellent water resistance with a quick adhesive tendency to concrete surfaces
• HOW TO USE – 1) Use patra to remove the paint from the walls 2) remove the putty till you see the plaster of the wall 3)Use wire brush to clean the wall 4)Use brush to apply water on the wall 4)Mix Dr fixit dampguard in 1 unit water,1 unit base and 1 unit hardener ratio 6) Use a brush to apply Dr Fixit
• AREAS OF APPLICATION - Internal walls, ceilings, RCC water tanks

• Very tough yet elastic coating
• Breathable, hence can be applied over damp surfaces
• Provides strongly bonded waterproof coating
• No dilution required, ready to use, brush applicable. Tintable and can be used over painted surfaces
• Prevents Mildew, Fungal & bad odour. Provides coverage of 20-27 sq. ft./kg in 2 coats.

• This is a unique cement additive having judicious combination of various selective polymers which work in different manner.
• Makes concrete more cohesive, hence protects steel better against corrosion.
• It reduces the permeability of water into concrete.
• Increases durability by improving waterproofing of concrete.
• Waterproofs by filling pores and cutting capillaries.
• Improved dispersion mechanism leading to water reduction.
• Increases cohesive strength of the mix.
• It makes concrete cohesive and prevents segregation.